The right tools for the job go a long way, but what do the right tools look like? Power tools fall into two broad categories: electric and pneumatic, based on how they're powered. Electric tools are generally more common, as many people think of an air compressor as a burden more than anything else, but pneumatic tools still see a use for a number of reasons.
Pneumatics Pack a Punch
Pneumatic tools tend to be comparatively small and lightweight due to their construction, a fact that DIYers will appreciate after a long day of work. More importantly, though, they provide a significant amount of power despite this—pneumatic motors are described as having a higher "power density" than electric motors, delivering more power and torque for a given size. Adjusting the power output is easily done as well, by adjusting the input from the air compressor or tank. This makes pneumatic tools a preferred option for tasks that require the application of bursts of power, such as punching holes, removing tough bolts and pile driving.
Safety and Reliability
Another advantage of pneumatic power is that it eschews some of the potential safety hazards of electric power. Pneumatic motors generate very little heat and aren't at risk of burning out when subject to excessive torque or frequent stops and starts. They also can be safely used in conditions where electric tools are risky, such as damp or wet environments or in areas with combustible materials like dust—excessive heat generation, as well as potential sparking, could ignite these materials or cause an explosion.
Additionally, while air compressors do require power to run, as long as you have some compressed air stored, pneumatic tools can be used in the event of a power outage. You can compress air ahead of time or turn to a compressed air service Jacksonville FL to purchase compressed air tanks.
Simple Maintenance
Most pneumatic tools are less expensive than their electric counterparts, both upfront—with the air compressor representing the major investment—and over time. Many of these tools don't even have a motor built in, instead using the compressor's motor. Air compressors are often compatible with multiple tools, with common connectors and regulators for pressure and flow. The lack of moving parts within the tool make maintenance and repair inexpensive as well—typically, you only need to lubricate parts and keep them from getting moist to ensure a good lifespan.
The post Benefits of Using Pneumatic Tools appeared first on Civil Engineering Community.
source https://www.civilax.com/benefits-of-using-pneumatic-tools/
