The Dlubal Software development team is pleased to announce the availability of RFEM 5.25 is a powerful software for quick and easy modeling, structural analysis and design of 2D and 3D models consisting of member, plate, wall, folded plate, shell, solid, and contact elements.
Update Report No. 03267 RFEM 5-25-01 | 02/18/2021
- Update of cross-section profiles of the company Schrag
- Implementation of cross-sections and materials according to ADM 2020
- Implementation of the member stiffness modification according to CSA S16:19 O.2.4
- Implementation of materials according to EN 10025-2:2019-10
- Implementation of a new result table for the load distribution from RWIND Simulation
- Improvement of the calculation performance through optimized consideration of the nodal degrees of freedom
- Adaptations concerning the display of cross-section outlines for tapered members
- Adjustments in the material database for aluminum according to the EN standard group - some series were split up to be able to represent the thickness ranges more precisely
- Adjustments in the solver regarding the compliance with the yield strength in the Material Model - Isotropic Plastic - 1D
- Adjustments in the result diagrams of sections regarding the consideration of the "Results Within Column Area" option
- Adaptations concerning the display of linearly smoothed support reaction diagrams
- Update of Bentley import/export - support of ISM version 8.0
- Adaptations concerning the graphical display of the filling of surface loads
- Adaptations concerning the graphical display of free variable loads on surfaces with a locally reversed coordinate system
- Optimizations regarding the input of parametric stiffnesses for the member type "Definable Stiffness…"
- Adaptations concerning the assignment of the load duration class of load cases from RWIND Simulation
- Adaptations concerning the result values in the table of surface contact stresses - especially in structures where lines and surfaces were simultaneously supported by failing line and surface supports
- Adaptations concerning the calculation of the section resultant for sections on multiple lines
- Adaptations in the results navigator of 2D positions regarding the selection of forces of line releases
- Adaptations concerning the hinge definitions of the member type "Truss" in 2D positions
- Adaptations concerning the graphical display of comments in connection with visibilities
- Adaptations in the mass print for results regarding the number of graphics to be generated
- Adjustment of the modulus of elasticity of the material VVS INOX (FATZER)
- Adaptations concerning the consideration of visibilities when selecting by means of the "Special Selection…" option
- Adaptations in the determination of shear areas of built-up channel sections regarding their upper limit
- Adaptations concerning the display of stresses in the result diagrams of sections through solids
- Adaptations concerning the cross-section weight as well as the material volume of hybrid rectangular timber hollow sections
- Adaptations concerning the Isotropic Damage 2D/3D material model regarding the display of plastic strains
- Adaptations concerning the generation of loads from motion on orthotropic surfaces
- Update of cross-section profiles of the company Schrag
- Implementation of cross-sections and materials according to ADM 2020
- Implementation of the member stiffness modification according to CSA S16:19 O.2.4
- Implementation of materials according to EN 10025-2:2019-10
- Implementation of a new result table for the load distribution from RWIND Simulation
- Improvement of the calculation performance through optimized consideration of the nodal degrees of freedom
- Adaptations concerning the display of cross-section outlines for tapered members
- Adjustments in the material database for aluminum according to the EN standard group - some series were split up to be able to represent the thickness ranges more precisely
- Adjustments in the solver regarding the compliance with the yield strength in the Material Model - Isotropic Plastic - 1D
- Adjustments in the result diagrams of sections regarding the consideration of the "Results Within Column Area" option
- Adaptations concerning the display of linearly smoothed support reaction diagrams
- Update of Bentley import/export - support of ISM version 8.0
- Adaptations concerning the graphical display of the filling of surface loads
- Adaptations concerning the graphical display of free variable loads on surfaces with a locally reversed coordinate system
- Optimizations regarding the input of parametric stiffnesses for the member type "Definable Stiffness…"
- Adaptations concerning the assignment of the load duration class of load cases from RWIND Simulation
- Adaptations concerning the result values in the table of surface contact stresses - especially in structures where lines and surfaces were simultaneously supported by failing line and surface supports
- Adaptations concerning the calculation of the section resultant for sections on multiple lines
- Adaptations in the results navigator of 2D positions regarding the selection of forces of line releases
- Adaptations concerning the hinge definitions of the member type "Truss" in 2D positions
- Adaptations concerning the graphical display of comments in connection with visibilities
- Adaptations in the mass print for results regarding the number of graphics to be generated
- Adjustment of the modulus of elasticity of the material VVS INOX (FATZER)
- Adaptations concerning the consideration of visibilities when selecting by means of the "Special Selection…" option
- Adaptations in the determination of shear areas of built-up channel sections regarding their upper limit
- Adaptations concerning the display of stresses in the result diagrams of sections through solids
- Adaptations concerning the cross-section weight as well as the material volume of hybrid rectangular timber hollow sections
- Adaptations concerning the Isotropic Damage 2D/3D material model regarding the display of plastic strains
- Adaptations concerning the generation of loads from motion on orthotropic surfaces
The structural FEA software RFEM for analysis and design of plates, walls, shells, solids, and frame structures is a powerful program for various tasks of modern civil engineering. This program forms the basis of a modular software system: RFEM determines internal forces, deformations, and support reactions of general plate structures with or without member and solid elements.
The program version RFEM 5 provides a wide range of useful features and options for efficient and user-friendly work on your structural analysis projects.
Details
| Software Title | Dlubal RFEM 5.25.01 |
| Size | 2 GB |
| Download Method | Direct Download |
| Download Links | BECOME A MEMBER VIEW DOWNLOAD LINKS |
The post Dlubal RFEM 5.25.01 appeared first on Civil Engineering Community.
from Civil Engineering Community https://ift.tt/3btglIn
